YateSMSC

Short Message Service Center (SMSC) for GSM, UMTS and LTE networks

YateSMSC it’s a conventional Short Message Service Center – SMSC –  with the functions of receiving, forwarding, storing and delivering SMSs in GSM, UMTS, LTE or custom networks. In addition to delivering Subscriber to Subscriber messages it can also implement various Application to Subscriber and Subscriber to Application scenarios.

A full featured, fully documented SMSC

Easy to operate SMSC solution for MNOs, MVNOs, private networks and labs using a JSON API through YateMMI web-interface.

YateSMSC, as well as other Yate solutions, offers a JSON API for configuration that can be used to setup SS7/SMPP interfaces, configure general network settings, request delivery of SMS and others.

The IP used to access the JSON API is provisioned by YateMMI (Mobile Management Interface) or can be set by hand. 

For a demo of the YateMMI with preconfigured YateHSS/HLR, YateUCN and YateSMSC please contact us.

Features and benefits

  • Fully implemented in software and uses commodity hardware.
  • Runs in a virtual machine in a datacenter facility or in cloud.
  • Low deployment and per-subscriber cost.
  • Uses standard SS7/MAP and SMPP interfaces.
  • Allows all-IP interfaces, SIGTRAN for MAP interconnects.
  • SMPP use for operator interconnect and applications.
  • JSON / HTTP delivery for easy application development.
  • Custom routing of messages to MAP, SMPP or HTTP URL.
  • Uses JSON API for configuration and control.
  • Management via a web-based interface, YateMMI.
  • Allows monitoring via SNMP, Zabbix or JSON API.
YateSMSC – Short Message Service Center ( SMSC ) for Mobile Networks

Software specifications​

  • Operating system
    Linux based, 64 bit
  • SS7 interface
    SIGTRAN M2PA or M3UA, SCTP/IP
  • SS7 MTP, SCCP
    ITU-T or ANSI dialects
  • MAP protocol
    ETSI MAP versions 1, 2 and 3
  • SMPP interface
    SMPP version 3.4
  • SMPP security
    SMPP over TLS supported
  • CLI interface
    Telnet protocol
  • JSON API
    Over HTTP or HTTPS
  • JSON delivery
    Configurable, templated HTTP or HTTPS URL
  • Online charging
    Diameter, RADIUS or JSON API
  • CDR
    File based, RADIUS or JSON API

Hardware recommendations

  • Dell PowerEdge R430
    3.5″ Chassis with up to 4 Cabled Hard Drives
  • Processor
    Intel Xeon E5-2630 v3 2.4GHz,20M
  • Memory
    8GB RDIMM, 2133MT/s, Dual Rank, x8 Data
  • Hard drives
    2 x 1TB 7.2K RPM SATA 6Gbps 3.5in Cabled Hard
  • Hard drive configuration
    RAID 1 for H330/H730/H730P (2 HDDs) with Cabled Chassis
  • Internal controller
    DVD ROM SATA Internal for 4HD Chassis
  • Network adapter
    Intel Ethernet I350 DP 1Gb Server Adapter, Low Profile
  • Power supply
    550W
  • Rack support
    ReadyRails™ Sliding Rails With Cable
  • Network adapter
    Intel Ethernet I350 DP 1Gb Server Adapter, Low Profile