Network settings changes
If network settings are edited, some changes may require reconfiguration of different equipment or reconfiguration of the entire network.
General step
- modifying Network name field will trigger changes for set operator request in YateHSS, YateUDM and HSS Slice members equipment types, so if it is set, equipment will need reconfiguration
- modifying MCC / MNC / CC / NDC fields, will require reconfiguration for all network equipment
- modifying MSISDN prefixes field, will require reconfiguration for all Yate STP and Yate HSS/HLR equipment types
- by disabling SS7 support feature :
– YateSTP, YateUSGW, 2Greet, GrandeSTP equipment types will automatically be disabled;
– other equipment types with SS7 support active will need reconfiguration as ss7 support will be disable on them as well: YateHSS, YateSMSC, YateOTA, YateUCN, YateUDM, YateUCN5G, HSS Slice Members.
- by disabling Diameter support feature :
– YateDRA, GrandeDRA equipment types will be disabled;
– other equipment types with active diameter support will need reconfiguration as diameter support will be disabled on them as well: YateUCN, YateHSS, YateSMSC, 2Greet, YateUDM, YateUCN5G, HSS Slice Members.
- by disabling 5G support feature:
– YateNRF equipment types will be disabled;
– other equipment types with 5G support active will need reconfiguration as 5G support will be disabled on them as well: YateUDM, YateUCN5G
- enabling HSS Clustering Support will trigger changes for equipment of type HSS
- disabling HSS Cluster Support while in use is not a normal behavior and this decision should be carefully done
- enabling / disabling Multidevices support will require reconfiguration for the following equipment types that will require reconfiguration: YateHSS, YateSMSC, YateUCN, UCN Group Members, HSS Slice Members
SS7 Step
- enabling / disabling Multidevices support will require reconfiguration for the following equipment types that will require reconfiguration: YateHSS, YateSMSC, YateUCN, UCN Group Members, HSS Slice Members
- modifying any Global SCTP parameters will require reconfiguration for each active equipment with SS7 support, including YateSTP and GrandeSTP
- modifying SMSC GT / GT prefixes fields will require reconfiguration for set operator request in YateHSS, YateUDM and HSS Slice members equipment types
- modifying Dialect / Netindicator / Connection type / SCCP TT / SCCP PC fields, will require reconfiguration for each active equipment with SS7 support
Diameter Step
- modifying Realms field will trigger changes for set operator request in YateHSS, YateUDM and HSS Slice members equipment types.
- modifying any SCTP parameters will require reconfiguration for each active equipment with diameter support, including YateDRA and GrandeDRA
Visited step
- modifying Prefix length for VPLMN validation / Other prefixes / Check URL / Hook URL / Use JSON POST / Check always / Default action for Check fields will require reconfiguration for set operator request in YateHSS, YateUDM and HSS Slice members equipment types.
APN step
- adding, deleting or editing fields from APNs step will require reconfiguration in YateUCN /YateUCN5G and UCN Group Members equipment types.
Extra params/Routing/Scripts step
- adding, deleting or editing fields from Extra params / Routing / Scripts step,will require reconfiguration for all equipment of the selected equipment type
Core Network equipment
Network STP
- adding or deleting Network STP will require reconfiguration also for all equipment types with SS7 support active
- editing Network STP equipment will require reconfiguration for all equipment types with SS7 support active. An exception of this behavior are the preferred routing fields from step SS7 settings that will require reconfiguration only for current Network STP equipment.
Network DRA
- adding YateDRA, will not require reconfiguration for equipment with Diameter support active
- deleting YateDRA that has connections with other equipment then only current equipment will need reconfiguration
- editing YateDRA listeners, will require reconfiguration for equipment (YateDRA / YateHSS / YateSMSC / YateUCN)
Network NRF
- adding, editing or deleting YateNRF will require reconfiguration only for current equipment
- when adding/deleting an equipment of type YateHSS, all other YateHSS equipment (if present) will also require reconfiguration
- adding editing or deleting an equipment without SS7 / Diameter /5G support, only current equipment will need reconfiguration
- when editing HSS cluster related fields in a YateHSS (name, IP /Port for cluster support, or IP management if no specific IP for cluster support is set) then all other YateHSS equipment (if present) will also require configuration
- by adding ,editing or deleting the equipment with Diameter / 5G support no changes will be generated for YateDRA / YateNRF equipment
- adding, deleting of an equipment with SS7 support, will need reconfiguration for current equipment and for YateSTP
- editing port in SS7 step from HSS equipment with SS7 support active current equipment and YateSTP linked to it will require reconfiguration
- editing pointcode in SS7 step from SMSC equipment with SS7 support active current equipment will require reconfiguration
SS7 support equipment
- modifying fields values in SS7 step from equipment with SS7 support active, current equipment and YateSTP equipment which is linked to it will require reconfiguration
- by disabling or enabling SS7 support from equipment, YateSTP and current equipment that has SS7 support will require reconfiguration
Diameter support equipment
- making changes in diameter step from within the quipment wizard with diameter support active, reconfiguration is required for current equipment only
- by enabling / disabling diameter support, current equipment will require reconfiguration and this will not affect YateDRA towards which equipment had connection to
5G support equipment
- by making changes in 5G step from equipment (UDM / UCN5G) current equipment will require reconfiguration except for NRF equipment
- by enabling / disabling 5G support current equipment will require reconfiguration and this will not affect YateNRF towards which equipment had connection to
HSS equipment when cluster support active
- by adding / deleting equipment of type HSS when cluster support is active from Network settings, the equipment will require reconfiguraton
- by editing IP management and Clustering Configuration fields from first step of an equipment with HSS type, the equipment will require reconfiguration
Core equipment + Grande HSS equipment
- adding / editing / deleting core equipment with SS7 / Diameter support active will require reconfiguration of current equipment also for YateSTP
- editing pointcode in SS7 step from YateSTP will require reconfiguration for both GrandeSTP, current YateSTP and other equipment with SS7 support active
- editing Global title in SS7 step from YateSTP will require reconfiguration for both GrandeSTP, current YateSTP and other equipment with SS7 support active
- editing IP in SS7 step from YateSTP will require reconfiguration for both GrandeSTP , current YateSTP and other equipment with SS7 support active
- editing HSS Routing / UCN Routing in SS7 step from YateSTP will require reconfiguration only for current YateSTP equipment
- editing Management interface IP from YateSTP will require reconfiguration for both GrandeSTP and other equipment with SS7 support active
- editing Hostname from YateSTP will require reconfiguration for both GrandeSTP and other equipment with SS7 support active
- editing Serial number from YateSTP will require reconfiguration for both GrandeSTP and other equipment with SS7 support active
- editing Management interface IP from YateDRA will require reconfiguration for both GrandeDRA and other equipment with Diameter support active
- editing Hostname from YateDRA will require reconfiguration for both GrandeDRA and other equipment with Diameter support active
- editing Serial number from YateDRA will require reconfiguration for both GrandeDRA and other equipment with Diameter support active
- editing Routing Table from YateDRA will require reconfiguration only for current YateDRA
Grande STP
- adding Grande STP will require reconfiguration for Grande STP and Network STP
- editing Grande STP linksets towards STP, will require reconfiguration for both network STP
- editing Grande STP linksets towards HSS slices, will require reconfiguration to all Slice members if members are active and have SS7 support active
- disabling SS7 support from GrandeHSS will require reconfiguration for all active slice members with SS7 support
Grande DRA
- adding Grande DRA will require reconfiguration for GrandeDRA only
- deleting Identities (dra/hss/hssfb) in GrandeDRA require reconfiguration for GrandeDRAs and for Slice members active with Diameter support active
- editing / deleting Conntections to network DRA in GrandeDRA will require reconfiguration for GrandeDRA only
- editing / deleting Conntections to network DRA in GrandeDRA will require reconfiguration for GrandeDRA only
- disabling Grande support in GrandeHSS will require reconfiguration for all active slice members with diameter support
Slice
-
editing SCTP connection in SS7 step will require reconfiguration for its Slice Members and both GrandeSTP
-
editing STP routing in SS7 step will require reconfiguration for its Slice Members only
-
editing Listener in Diameter step will require reconfiguration for its Slice Members and GrandeDRA that are linked to
-
adding new Listener in Diameter Step will require reconfiguration for its Slice members and GrandeDRA that is linked to
-
adding / editing values in HSS step will require reconfiguration for its Slice member only
-
adding slice without members will be no equipment to reconfigure
-
editing slice without members will be no equipment to reconfigure
-
deleting slice without members will be no equipment to reconfigure
-
It is not allowed to delete slice with members
-
disabling / enabling SS7 / Diameter support will require reconfiguration for Grande DRA / Grande STP and Slice members
Slice members
-
adding, editing or deleting member with SS7 support will require reconfiguration to GrandeSTPs and Members from current Slice
-
deleting member with SS7 / Diameter support will need reconfiguration for both GrandeDRA and Memebers from current Slice
-
adding member with SS7 / Diameter support will need reconfiguration for both GrandeDRA and Memebers from current Slice
-
editing Slice member will require reconfiguration for Members from current Slice
-
disabling / enabling member will require reconfiguration for GrandeSTP/GrandeDRA
-
adding / deleting members of a slice will automatically require reconfiguration for all slice members (due to cluster support)
-
add edit or delete IP and Port from Clustering configuration will require reconfiguration all slice members