Traditionally, the redundancy of the Mobile Switching Center / Visitor Location Register (MSC/VLR) is obtained through redundant dedicated hardware and software. The problem lies in the Abis + A interfaces (BSSAP protocol) which do not allow a base station to move easily to another MSC/VLR. To overcome this problem, we decided to use the SIP protocol (with enhanced features for GSM operations), which allows a YateBTS SatSite base station to move to another YateUCN (MSC/VLR) automatically and quickly.
Redundant GSM MSC/VLR
In a GSM network deployed with YateBTS-based SatSite base stations and YateUCN core network servers, each subscriber is randomly assigned to a YateUCN from a pool of core network servers. Operators can increase the redundancy of the pool by simply adding additional YateUCN servers for excess capacity in case a unit malfunctions. Therefore, handsets connected to a single SatSite can be served by multiple identical YateUCNs, while, at the same time, a single YateUCN serves multiple SatSite units. If a YateUCN server fails, all the mobile devices served by it are automatically moved to the other available YateUCN servers. When the subscriber is registered to the new YateUCN, its location is updated in the HLR.
In short, YateUCN and the GSM YateBTS SatSite base stations form a many-to-many relationship, and this was made possible though a number of characteristics.
- The GSM YateBTS SatSite implements all the functions of a conventional Base Station Controller (BSC).
- The A interface (between the BSC and the MSC/VLR) was replaced with SIP (between YateBTS and YateUCN), making it possible to quickly re-associate handsets with different YateUCN servers.
- All YateUCN servers are identical units that support many core network functions. Operators will only have to duplicate one component, as opposed to multiple in conventional networks.
- YateUCN is implemented in commodity hardware (off-the-shelf servers) and software (Linux), delivering a shorter lead time, more servicing options and faster replacement time.
The diagram above illustrates the technology perfectly.
Integration in an LTE core network
The SatSite and the YateUCN components are easy to integrate into existing LTE networks because 2G services are delivered in SIP. These GSM services are integrated into a 4G network by employing the same GTP and IMS interfaces that are typically used in conventional EPC/IMS core networks.
YateUCN implements the same SIP switch to both provide GSM services and connect to an existing IMS network. Thus, with both the SIP-powered RAN and core network products, operators’ migration from GSM to LTE turns into a much simpler process.
Integration in a GSM core network
As an MSC/VLR, YateUCN performs all the functions of other MSC/VLRs: mobility, authentication, speech call and SMS routing. The server supports authentication of handsets using the SIM/USIM (EAP-SIM/EAP-AKA) and SIP AKAv1-MD5 algorithms.
YateUCN can connect to any standard HLR via the SS7 MAP protocol, and to other MSCs and GMSCs through the MAP-E protocol, allowing it to be in any conventional GSM network.
A few final words
YateUCN brings something new to GSM equipment: affordable redundancy, scalability, and uncomplicated management into a single core network server. It is easy to integrate to existing GSM and LTE networks and can be easily upgraded with new features within the same hardware and allows operators a seamless network extension.