Webinar: LTE LabKit - test eNodeB / BTS
Configuration and practical demonstration

This webinar is presenting the LabKit – How to setup, configure the working modes, UE connections and performing a VoLTE call.

  1. What is the LTE LabKit
  2. How to setup the LTE LabKit
  3. The LTE LabKit’s benefits
  4. Who uses the LabKit
  5. Practical demonstration
LTE LabKit Webinar - Configuration and practical demonstration 1

What is the LabKit ?

The LTE LabKit is a Lab eNodeB running on a small factor PC. 

  • LTE eNodeB / GSM BTS built on commodity hardware
  • A test “call box” for IoT production lines
It comes preinstalled with the following software components:
  • YateENB
  • YateBTS
  • YateLMI

How to setup your LTE LabKit​


  1. The Power Cable
  2. The WiFi Adapter
  3. The Filters
  4. The TX and RX Antennas

Log In:

  • Username: yatebts
  • Password is the serial number printed as a sticker on your LabKit
  • For remote access via SSH, port is 54321
LTE LabKit Webinar - Configuration and practical demonstration 2

LTE LabKit Benefits

  • Real Network Equipment
    This is a small eNodeB used for testing. Is is a real equipment that is only limited in hardware.
  • Light and Silent
    It weighs 2.5kg. You can install it on your desk, rather than a data center and it’s suitable for traveling.
  • Easy to use: Plug-n-play
    Easy to install and configure. Just connect the equipment to the internet and start operating.
  • Upgradable
    The LabKit is upgradable to new standards and tech updates such as MIMO, 5G, CAT M1, NB-IoT.
  • Free Support
    When you purchase your LabKit you will benefit from free technical support.
  • Free Hosted Core
    The LTE LabKit comes with free access to the Hosted Core in order to connect the radio equipment to a core network.
LTE LabKit Webinar - Configuration and practical demonstration 3
LTE LabKit Webinar - Configuration and practical demonstration 4

Who uses the LabKit ?

  • MVNO
    Such operators can use the LabKit to test the interconnection between their networks and an eNodeB.
  • IoT Production line testing
    The LabKit supports both application and hardware testing allowing to study the behavior of IoT products under different network conditions.
  • Security Labs
    The LabKit is able to test 3G and 4G devices, specifically their behavior in networks with incorrect configuration.
  • IoT Operators
    IoT MVNOs can use our LTE LabKit to simulate the behavior of their customers in the MNO’s network.

Practical Demonstrations

  • LMI (Local Management Interface)
    Walk through and setup
  • Working modes
    LTE eNodeB and the GSM working modes: NiPC (Network in a PC), GSM roaming, GSM Dataroam
  • Phone connections
    Transaction between the phones and the LabKit
  • Wireshark
    Wireshark captures of the connections
LTE LabKit Webinar - Configuration and practical demonstration 5

Get your LTE LabKit today!

Order your LabKit from our website and have it shipped at your office at the price of $5,980.